Cinegears Wireless Video Transmitter
Cinegears Wireless Video Transmitter Uses License-Free 5GHz ISM frequency band, maximum 10 frequency channels manual selection, Coexist with WIFI.
Supports wireless 10 bit HD video with no compression and no delay up to 300 meters/984 ft.
Uncompromising picture quality with very low latency <1ms
Supports point to point and point to multi-points network topology, multiple receivers are supported with an unlimited number of receivers.
Cross compatibility between Cinegears Ghost-eye 100M, 300M, and 400M transmitter and receivers.
Highest resolution 10bits color depth 4:2:2, 1080p 60FPS HDMI and SD/HD/3G SDI input and output, HDMI – SDI cross conversion is supported.
Support professional audio formats include Dolby True HD, DTS-master, etc.
AES-128 encryption with air interface HD video data stream.
Wide range power voltage input, adapts most kinds of camera batteries, optional Standard V-mount, Anton Bauer, or ¼ bolt Mount battery plate can be installed.
Sony F970 battery buckle, convenient for field battery install and replacement.
Any input and output ports with ±8 kV ESD protection level (HBM, contact discharge).
Plug & Play- full hardware design, no software is required.
Professional standard 2-pin LEMO power plugs.
Built with an industrial metal case that is both sturdy and reliable.
RX(Receiver) built-in directional antenna.
Signal indicators for wireless power status, Video status, and receiver RSSI.
Water and mist proof, shockproof production case with form insert ready for traveling.
CE, FCC, RoHS certified product, safe to use worldwide.
Specification: Cinegears Ghost-Eye Wireless HD & SDI Video Transmission Kit 150M